The double groove steel is suspended under the two nodes of bottom chord of steel roof truss to prevent the bottom chord from stretch bending.

文章论述了在设计中采用钢屋架下弦两节点下悬吊双槽钢作为分布梁避免钢屋架下弦拉弯工作。

This paper based on the theory of Cold Roll Forming for groove steel, discuss the methods for confirming the figures and the dimension for groove steel.

以槽钢辊式冷弯成型理论分析为基础，论述了槽钢辊式冷弯成型的孔型构成及孔型尺寸的确定方法。

This paper based on the theory of Cold Roll Forming for groove steel, discuss the methods for confirming the figures and the dimension for groove steel.

本文介绍了梁柱端板连接的一种满足某种建筑要求的加劲方法，即采用槽钢代替传统的加劲方式作为加劲肋。

The easygoing steel guitar groove of “I Can’t Forget” elevates Cohen’s stunning lyrics:”The summer’s almost gone/The winter’s tuning up.”

歌曲“我不能忘记”（I Can’t Forget）中轻松随和的钢弦吉他提升了科恩美妙歌词得档次：“夏天几近远在，冬天正将到来”。

The flange pipe of the high diameter groove is a new type of steel pipe connection, also known as the clip connection, there are many advantages.

高径槽法兰管是一种新型的钢管连接，也称为夹连接，有许多优点。

The steel with discontinuous flowline microstructure has lower grooving corrosion susceptibility and only single corrosion groove exists along the welding line.

而不连续流线组织的钢板具有较低的沟槽腐蚀敏感性，在焊缝处产生单腐蚀沟槽。

This article describes the in-field fabrication process of those steel structures, such as lining, shear, groove preparation, punching hole, bending, assembling and welding etc.

介绍了火电厂承重钢结构的现场加工制作、划线、剪切、坡口加工、打孔、弯制、拼装及焊接等工艺过程。

In most cases the cross section of the bearing rings of a stainless steel deep groove ball bearing is very thin and the side faces correspondingly slim.

在多数情况下，不锈钢深沟球轴承的轴承圈横截面很薄，因此侧面也就很薄。

Time for the third kind of closing well is so long that flange steel ring groove on the top of casing-head is heavily corroded in M4 well being situated in Tarim basin.

位于塔里木盆地的M4井，由于三类封井时间较长，造成套管头上部法兰钢圈槽严重腐蚀。

Influence of groove hardness of steel sheave on fatigue life of wire rope from HB170 to HRC60 is investigated.

对绳槽硬度从HB170 ~ HRC60的各种滑轮对钢丝绳疲劳损伤的影响进行了研究。

Groove joints are sealed by sheet steel and wrapped with canvas. This new construction technology improves anti-seepage property as well as expedite construction speed.

对地下连续墙槽段节点采用钢板封口及外包帆布的施工新工艺，提高了构造的抗渗漏性能，也加快了施工速度。

The paper analyzed the welding characteristic of stainless steel clad plate, and summarized three factors that were welding groove, welding materials and parameter, welding sequence.

对不锈钢复合钢板的焊接特点进行了理论分析，总结出其焊接三要素：焊接坡口、焊接材料和参数、焊接顺序。

The utility model has the characteristics of reasonable structure, reliable work, and long service life; the steel cable can not disengaged from the groove.

本实用新型的特点是：结构合理、工作可靠、钢绳不脱槽、使用寿命长。

The manufacturers find it difficult to detect the steel pipes with extra deep internal thread groove if they do not meet the relative quality standards.

内螺纹槽超深的钢管不符合相关质量标准，但生产厂却难以检测出内螺纹超深的钢管。

The national standard prescribed different kinds of groove forms and groove sizes for steel welded joints.

本标准规定了钢焊接接头的各种坡口形式与坡口尺寸。

Stainless steel deep groove ball bearings that can withstand moisture and a number of corrosion caused by other media.

不锈钢深沟球轴承能够避免潮湿和其他因素造成的腐蚀。

Structural main beam: steel plate cold bending U type groove plus middle vertical rib plate combination.

结构 主梁：钢板冷弯U型槽加中幅立筋板组合。

The novel winding drum designs each circle of groove on the surface of a steel drum into a straight groove and an inclined groove distributed at intervals so as to overcome the defects.

本发明将钢筒表面的每圈凹槽设计成规则有序的两段间隔分布的直槽和斜槽，从而克服了上述缺陷。

A practical mechanism for the core-pulling of inside groove was presented. The core-pulling was achieved by applying the deformation of helical spring steel sheet during the ejecting process.

介绍了一种实用的内侧槽抽芯机构，可利用螺旋形弹簧钢板的顶出变形实现内侧抽芯，并阐述了抽芯机构的工作过程和关键技术。

The influence of the grinding plate groove shape on steel ball processing quality is briefly analyzed.

简要分析了研磨盘沟槽形状对钢球加工质量的影响。

The inside of the streamline shape head part of the closed type drain tube is provided with the positioning groove of the guide steel needle.

封闭式引流管流线形头部内侧设有导引钢针定位凹槽。

We measure the wear ratio while machining the stainless steel use the tungsten electrode. From the experiment, the precision of the groove is good via applying the compensation method…

实验测定了钨电极加工不锈钢的损耗率，应用适时补偿方法加工得到的单层单道窄槽的尺寸精度良好。