The two parts are TIG welded together.

两部分的氩弧焊焊接在一起。

The TIG welder used for much of the construction.

在氩弧焊焊接机建造多次使用。

We offer glue bonding or TIG welded stator cores.

我们提供胶合剂定子铁芯或TIG焊接的钉子铁芯。

And in TIG welding, the rate of are successful increased.

TIG焊时的一次引弧成功率高。

Capabilities include stick, basic TIG, MIG and flux-core welding.

功能包括粘、基本氩弧焊、电弧和助焊剂核心焊接。

Adopting TIG welding is an effect measure to prevent heat cracking.

提出了该合金采用TIG焊接防止热裂纹产生的措施。

The result shows that the method is available to model the TIG welding dynamic process.

结果表明，用该方法对TIG焊过程建模是有效的。

A new type of maraging steel metal powder-cored wire for die TIG surfacing is developed.

研制了一种用于TIG模具堆焊的马氏体时效钢金属粉芯焊丝。

A new type of age hardening alloy metal powder-cored wire for TIG surfacing is developed.

研制了一种用于TIG堆焊的时效硬化工具合金金属粉芯焊丝。

This paper introduces the TIG _ welding technology of repairing stainless steel casement.

介绍了不锈钢镶套的TIG焊接工艺。

In TIG welding of titanium alloys, the welding quality usually depends on the gas shielding.

应用TIG焊接钛合金时，气体保护问题常常是决定焊接质量的关键。

The varied weld penetration depths of austenic stainless steel in A-TIG welding are studied.

采用活性化焊剂TIG焊接方法研究了奥氏体不锈钢焊缝熔深的变化。

Abstract: This paper introduces the TIG - welding technology of repairing stainless steel casement.

文摘：介绍了不锈钢镶套的TIG焊接工艺。

Welding tests showed the panel TIG welding machine can be applied successfully in hyperbaric conditions.

试验证明，该焊机可以成功地应用于高压环境下的焊接。

The application of automatic TIG welding on stainless steel compound pipes production line is introduced.

介绍了钨极自动氩弧焊在不锈钢复合管生产线上的应用。

In addition, the mechanism of the T-TIG arc pressure reduction to make the sound weld formation was analyzed.

此外，在焊接试验的基础上，进一步对双钨极氩弧焊降低电弧压力、减少焊接缺陷的机理进行了分析。

The experiments show that adaptive system is excellent in controlling weld bead for aluminium alloy TIG welding.

试验结果表明，自适应控制方法可以实现对铝合金TIG焊缝成形的良好控制。

The paper researches the relation of parameters and weld width of TIG deposit surfacing used in rapid prototyping.

研究了用于快速成形的TIG熔敷堆焊工艺中各参数与焊缝宽度的关系。

Welding equipment includes automatic plasma arc and TIG hardfacing machines. Only a few typical machines are shown here.

焊接设备包括自动等离子弧和TIG 表面硬化机械设备。在此只展示少数典型设备。

Many hotels and destinations have recently approached TIG Global and asked about improving their social media visibility.

最近，有很多酒店和旅游景点来咨询TIG Global，如何才能提升社会媒体营销的效果。

A three-dimensional numerical analysis model of fluid flow and heat transfer in pulsed current TIG weld pool is developed.

对运动电弧作用下脉冲t IG焊接熔池流场与热场动态变化过程建立了三维数学模型。

According to small signal theory of automation theory, arc of low current TIG welding can be considered as a linear system.

依据自动控制理论中的小信号理论，小电流TIG焊的电弧具有线性系统的特征。

Residual extend stress is produced at weld toe by TIG dressing, while compressing stress of high values by ultrasonic peening.

TIG熔修处理工艺在焊趾区引入了残余拉应力，而超声冲击在焊趾区形成了较大数值的压缩应力。

Experiments were conducted under the conditions of TIG welding with small current and thin plates. The desired dada was extracted.

在小电流薄板脉冲TIG焊接全熔透的试验条件下进行了试验，并获得了所需数据。

Finally, an experimental verification of the classification results for TIG weld quality with different process parameters is shown.

最后将展示的是TIG焊接法质量的等级分类的不同工艺参数的加工实验检查结果。

The TIG process test indicates that under the deviation with small inclination, the groove tracking in real time performance is good.

TIG工艺试验表明：在小斜度偏差的情况下，该控制系统具有较好的坡口跟踪的实时性和精度。

In this paper, the vision technology with adaptive control technology are used in TIG welding quality control of the aluminium alloy.

将视觉传感技术与自适应控制技术相结合用于铝合金tig焊接过程质量控制。

The adaptable control TIG automatic welding system for large-size astronautics container circumferential was introduced in this paper.

介绍了一种大型宇航容器环向焊缝适应控制TIG自动焊接系统的设计方案。

The article mainly introduces the FRONIUS TIG process and ETR automatic cladding equipment which are applied in the production of valve.

重点介绍了Fronius热丝TIG焊工艺和ETR全自动堆焊设备在阀门堆焊制造上的应用。