After lunch, you will go to the heavy plate workshop.

午饭以后参观厚板车间。

Medium and heavy plate has been widely used in mechanical industry.

中厚板在机械工业中早已有广泛应用。

The over burnt temperature of the 7B04 alloy hot rolled heavy plate is 481.

分析结果表明：（1）7B04铝合金热轧厚板的过烧温度为481。

Since each stage devices are fully equipped, so no heavy plate or frame store van.

由于每个舞台装置都装备齐全，因此无需笨重的板块或框架存储搬运车。

The results provide reference for making parameters during the heavy plate rolling.

该结果可为厚板轧制过程参数的设定提供参考。

Continuous walking beam type reheating furnace is main heating equipment of heavy plate mill.

步进式加热炉是宽厚板生产的主加热设备。

The control functions and features of the cold plate leveler in baosteel heavy plate mill are introduced.

主要介绍了冷矫直机的控制方式和控制特性，并对其中重要的控制功能进行了详述。

This article describes a comprehensive technology of low cost gage control in medium and heavy plate mill.

论述了中厚板轧机的一种低成本厚控综合技术。

The surface quality of medium and heavy plate has an important influence on its production and application.

中厚板的表面质量对中厚板的生产和使用均有重要影响。

The main motor needs to be replaced during the whole modernization in Heavy Plate Plant of Angang New Steel Co.

鞍钢新轧钢公司厚板厂整体改造过程中，主电机需更换。

Based on a lot of spot measurement and trial work, the customary rule of slab design of the heavy plate was modified.

在大量现场测量与试验基础上修改了工厂原有坯料设计规则。

Striplike sulfide inclusions are generally distributed in medium and heavy plate produced by Anyang Iron and Steel Corp.

安钢中厚钢板中普遍分布有长条状硫化物夹杂。

Normalizing furnace is the major equipment for heat treatment process of medium and heavy plate of Wuyang Iron and Steel Co. Ltd.

常化炉是舞钢中厚板热处理工艺的主要设备，近几年来钢板常化辊印严重影响子舞钢的产品质量。

Deformation regulations of metal and technical characteristics of rolling heavy plate during rolling wide heavy plate are explained.

阐述了宽厚板轧制过程中金属的变形规律和厚板轧制工艺特点。

The characteristics and the manufacturing difficulty of the backup rolls for the heavy plate mill have been described in this article.

简单介绍了厚板轧机支承辊的特点以及制造难点。

Abstract The critical cooling rate of steel is very important in heavy plate quenching process, and it is the basis of the cooling process.

在中厚板淬火工艺中，钢的临界冷速是非常重要的参数，是制定冷却工艺的基础。

The problems of low qualification ratio of steel plate properties exist in production of SS 400 steel plate at AISC Wide and Heavy plate Plant.

鞍钢宽厚板厂在SS400钢板的实际生产中，存在着钢板性能合格率低的问题。

All these design and control offered the methods and successful paradigm to ameliorate controlled cooling system of medium and heavy plate production.

该设计及其控制对改进中厚板控制冷却系统提供了方法和成功的范例。

Angle distortion modeling and prediction with computer for heavy plate multi-pass welding are carried out during condenser fabrication for nuclear power station.

对核电凝汽器制造中的大拼板多层焊后的角变形进行了计算机预测。

At present, the market "situation" of medium and heavy plate is at the condition that "total production capacity has been met while product mix needs adjustment".

当今中厚板市场“态势”处于“生产能力总量满足，结构尚需调整”状况，“零和”竞赛局面已形成。

The shrinkage cavity, depression, shrinkage porosity, scab and swell defects often took place with the heavy plate castings produced by adopting traditional foundry method.

厚实板类铸件按传统工艺生产，容易产生缩孔、缩凹、缩松、夹砂、胀包等铸造缺陷。

The surface defect on medium and heavy plate Q235B was investigated by means of the optical microscopy, scanning electron microscopy and energy spectrum analysis in this paper.

对Q 235 B中厚板表面缺陷处的显微组织、非金属夹杂物等进行了金相组织和扫描电镜观察及能谱分析。

A brawny warrior is just fine in the heavy plate armor with a big bag of loot over his shoulder while a slender mage will be more concerned with the lighter pieces of treasure.

强壮的战士可以装备重型板甲，还可以携带大型包裹。而身材苗条的魔法师就更注重于携带轻型的物品。

The application of the ultrasonic detector system in heavy plate mill and introduce the theory and consist of the system. It has better practice in faults auto-detecting on the plate.

介绍超声波探伤检测系统的实际应用，阐述超声波探伤的原理及系统的基本组成，在钢板缺陷的自动检测方面有较好的实用效果。

It is described that the advantages of Static-type dynamic wattless power compensation device based on the main drive SCR power supply matching engineering in Heavy Plate Plant in AISC.

以鞍钢厚板厂主传动scr供电配套工程为例。介绍了静止型动态无功功率补尝装置的优点。

The cut principle and feature of the rolling cut trimming shear were set forth, and the application of rolling cut placed on cutting line for the heavy plate mill at home were analyzed.

简述中厚板剪切机的基本类型和特点，对滚切剪的剪切原理和特点进行阐述，分析了国内中厚板厂剪切线滚切剪的应用。

This paper describes the frequently occurred profile defects on heavy plate and high strength plate, makes an analysis of their forming cause and puts forward corresponding control measures.

本文介绍了厚板及高强钢板常见的板型缺陷，分析了其形成原因，提出了相应的控制措施。