查询
1 词典释义:
visual measurement
时间: 2025-03-25 23:57:27

目测

双语例句
  • An automatic visual measurement system designed for evaluating the print quality of printing papers is presented.

    介绍了自行设计的打印质量检测系统。

  • The paper introduces how to apply the bi-eye visual measurement technique to resolve the re-orientation of the workpiece.

    介绍了如何利用双目视觉测量技术来解决工件的重定位问题。

  • Objective to establish the evaluation methods of ready-made Chinese medications on the basis of the tongue-color visual measurement.

    目的建立基于舌色视觉计算的中成药疗效评估方法。

  • The method of ceramics quality evaluation is still adopt handle and visual measurement in our country, the result sometimes is unreliable.

    目前我国陶瓷行业仍然采用手感和目测等方法进行质量评估,其评估结果往往是不可靠的。

  • As primary condition for visual measurement, camera calibration is focused on how to build the relation between image coordinates and spatial coordinates.

    摄像机标定作为视觉测量的首要条件,旨在建立图像坐标与空间坐标的关系,摄像机标定实质上是确定摄像机内外参数的一个过程。

  • It will provide a highly efficient and reliable platform for CNC machining, tri-ordinate measuring, visual measurement, force control, redundant control research.

    它将为数控加工、三坐标测量、视觉测量、力控制研究、冗余控制研究等方面提供一个高效而可靠的平台。

  • Because of its high automization, this analyzer can eliminate the errors of visual measurement improve the accuracy of measurement and exhibits superior reproducibility.

    由于该仪器的自动化程度较高,消除了目测造成的误差,提高了试验精度,并有很好的重现性。

  • The Laser Angle sensor consists of a block prism and a hologram grating. The principled experiment has been finished by visual measurement of fringes, and is introduced in this paper.

    激光角度传感器由立方角棱镜和全息光栅组成,本文完成了目测条纹下的原理性实验。

  • Based on non-contact three-dimensional measuring principle of computer vision and light refraction principle, a new theoretical method of visual measurement in multi-medium was proposed.

    基于计算机视觉的无接触三维测量原理和光的折射定律,提出一种多介质下空间目标视觉测量方法。

  • This method has been successfully applied to the space rendezvous and docking simulation system as visual measurement subsystem, the experiment results validate the feasibility of the proposed method.

    该方法在空间交会对接地面仿真系统的视觉测量子系统中进行了试验,现场实验结果验证了本文视觉位姿测量方法的可行性和有效性。

  • Reovering the feature point and feature line is the basic in the computer visual inspection, the high-precision is asked in the measurement of industry.

    特征点、特征线的提取是计算机视觉检测的基础,特别是在工业检测中要求很高的精度。

  • Color measurement can be performed via visual method or physical one, the later must follow the corresponding metrological principle.

    颜色测量方法分为目视测色和仪器测色两大类,而仪器测色必须符合计量的标准。

  • The principal research of content based image retrieve (CBIR) includes two aspects: visual feature representation and similarity measurement.

    基于内容的图像检索(CBIR)技术的研究主要包括两个方面:可视化特征提取和相似性度量。

  • The paper also raises many questions related to content measurement, content structures, and visual displays of content and content structures.

    本文还提出了关于内容测度、内容结构和内容与内容结构的可视化显示的许多问题。

  • Objective: Improving the accuracy of adding solution in the measurement of antibiotic titer, lowering the visual error which can lead a high result in confidence-limit rate.

    前言:目的:提高抗生素效价测定中加液的准确性,降低由于视觉误差造成测定结果可信限率的偏大。

  • The researches at home were focus on anthropometry, ergonomic evaluation of visual displays and personal protective equipments, measurement of work ability and workload.

    国内研究集中在人体测量、视觉显工效学评价、个体防护装备工效学评价、工作能力和工作负荷测量等方面。

  • A method of measuring visual acuity with holographic grating is described. The measurement may be performed with a slightly modified conventional ophthalmoscope.

    本文概述了用全息位相光栅干涉法将原眼科用的裂缝灯稍做改进便能测定人眼视觉锐度的新技术。

  • The principle of the IVA or Retinal Visual Acuity measurement of eye is described. An optical system is designed for the IVA measurement.

    阐述了人眼视网膜激光干涉条纹视力IVA(视网膜视力)测量的原理,设计了一套测量视网膜视力的光学系统。

  • In networked multimedia systems, the probing traffic generated by active measurement of available bandwidth might interfere with the audio-visual communications.

    网络多媒体系统中,需要对可用带宽进行主动测量,但测试流会妨碍数据传输质量。

  • The cut edge is magnified with a projector to aid measurement and visual inspection.

    切口边缘被投影器放大了,目的是方便测量和观察。

  • A set of experimental measurement system to the chang process for impulse TIG welding pool width has been established based on contact measurement in front of weld by visual computers.

    建立了一套以计算机视觉焊缝正面检测为基础的脉冲tig焊熔池宽度变化过程的实验检测系统。

  • Visual estimation, tape measurement between fixed landmarks, and the UG aligned on fixed and anatomic landmarks were compared with the CROM goniometer, which was used as the reference standard.

    视觉判断、在固定标志点弹性带子测量、解剖标志点固定通用量角器和CROM量角器比较,CROM量角器测量认为是一种参考标准。

  • A convenient and visual way was found to instant measure frequency via effect of acoustooptic deflection, making solution to the conventional radar carrier frequency measurement.

    针对传统雷达载频测量方法的不足,设计出了一种基于声光偏转效应的简单快捷的可视化频率测量方法,实现了对雷达频率实时并行检测。

  • This paper describes a computer visual technique for on-line measurement of the height of foaming slag in blast furnace which simulation experiment has been done in laboratory.

    给出一种基于计算机视觉技术的高炉熔渣泡沫高度在线检测方法。

  • Visual inspection; Machine vision; Visual sensor; Three-dimensional measurement;

    视觉检测;机器视觉;视觉传感器;三维测景;

  • It has many advantages, such as convenient measurement, simple and easy operation, visual and reliable measurement results as well as correct judgement.

    该法具有测量方便、操作简单。测量结果直观可靠、判断准确等优点。

  • The visual clear artery indicator label and index range help determine the proper size cuff for each patient and ensure correct blood pressure measurement.

    形象清晰的动脉指示标记和尺寸适用范围标识确保正确的血压测量。

  • There are differences between actual measurement and visual inspection, so we shouldn't make judgments based on the data from visual inspections.

    实测和目测是有差距的,我们不应根据目测的数据来作判断。

  • In this paper, a fast visual evoked potential measurement technique-system identification with pseudo-random sequences is presented.

    本文利用伪随机序列相关辨识技术,实现了快速检测视觉诱发电位。

  • SRK-T formula had the best predictability. Conclusion: Accurate measurement data, suitable formula selection and the patient's need of visual function are important in myopia IOL calculation.

    结论:对于高度近视患者的人工晶体度数的计算,不仅要精确术前的生物测量、选择合适的计算公式,还需要根据患者不同的视力需求进行人工晶体度数的设计。