D: Plastics screw thread (as per sample).

D：塑料丝扣(见样品)。

The screw Thread of the cylinder connecting block stripped.

气缸连接挡块的螺纹滑牙了。

Their quantitative relation is set up in the same screw thread.

从而建立了同一普通螺纹中两者之间的定量关系式；

Lighting body connected by screw thread, sturdy and durable, easy installation.

灯体螺纹式连接，坚固耐用，安装方便。

The reasons for the shortage of screw thread after skew rolling were discussed.

另外，还对斜轧过程中容易出现牙型尺寸不足的原因进行了分析。

Components of screw thread with special specifications are also tailored available.

也可根据客户需要订制特殊规格的螺纹元件。

Screw thread gauge is the most extensive and practical detector in thread machining.

螺纹量规是螺纹加工中应用最广泛、最实用的检测工具。

The realizing of parametric design of screw thread of PDC bit makes CAE/CAM possible.

实现了PDC钻头螺纹部分的参数化设计，为进一步的CAE/CAM打下了坚实的基础。

A toothed rack was commonly adopted for the automatic screw thread rotational unloading.

自动旋转脱螺纹一般采用齿轮齿条机构或液压齿轮机构。

This paper analyzes the method of processing thread with the knife with single blade screw thread.

本文分析了用单刃螺纹刀来加工螺纹的方法。

The dismantling screw provided by the manufacturer often fails because of screw thread damage in use.

制造厂家提供的拆卸螺杆在使用中经常发生螺纹损坏而导致失效。

It is about the ring screw thread smoke channel of the boiler shell type gas tube in the boiler field.

锅壳式烟管锅炉烟管内置水管的环形螺纹烟道，它涉及锅炉领域。

In the design of die casting die with screw thread, the automatic screw thread unloading is a difficult point.

铸件螺纹脱模是压铸模设计的难点之一。

As such, magnetic particle inspection for the screw thread of the drill collar is very necessary and important.

因而钻铤内外螺纹的磁粉检测十分必要和重要。

The experiment illustrated that fuzzy image method can improve the accuracy of screw thread metrology significantly.

实验证明使用模糊成像法可大大提高螺纹图像测量系统的精度。

The heat transfer and flow pass condensation segment in the gravity heat pipe with inner screw thread were investigated.

分析了在重力热管内加内螺纹的方法，研究了重力热管的冷凝段的传热及流动状况。

The automatic screw thread unloading is a difficult point in the design of die casting die for castings with screw thread.

铸件螺纹脱模是压铸模设计的难点之一。

The connecting pipe and the fixed sleeve pipe are fixedly connected mutually by a screw thread type or a clamping slot type.

接管和固定套管互以螺纹或卡槽式连接固定。

It is verified through practice that this test-bed could effectively test the anti-loosening property of screw thread connections.

实践证明，该试验台能有效测试螺纹联接的防松性能。

In cutting experiments, it can be observed and measured that the chip thickness, the tool wear, the screw thread teeth, and so on.

在切削实验中，可对切屑厚度、刀具磨损及螺纹等的形貌进行观察并测量其尺寸。

The sensor shall be mounted on object surface, by fixation of screw thread or flange, and ensure firm contact with the equipment surface.

传感器采用贴面形式安装在物体表面，固定形式为螺纹或法兰，并确保与设备表面接触严密。

In normal use, non spiral crown should push the crown back to the original position, the crown screw thread to prevent water infiltration.

正常使用中，非螺旋式表冠应将表冠按回原始位置，螺纹表冠应旋紧以防止水渗入。

4 , screw thread gob produced by internation standard , material is 38chrome molybdenum aluminium azote steel , high rigidity , long time.

四螺纹口按国际标准化制造，材料选用38铬钼铝氮化钢，硬度高，使用寿命长。

No Screw Thread Connect Fix, No Sway Rotate Connect, Two Layer Seal, Distinctive Seal Protect Craft, Prevent Impurity Enter The Seal Layer.

无螺纹连接固定，无摆动旋转连接，双层密封，独特密封保护工艺，防止水中杂质进入密封层。

there has no screw thread on the installation hole on head of water-cooling. It's difficult to install it by the screw tap which along the products.

产品有以下缺陷：水冷头上的安装孔没有螺纹，用配带的自攻螺丝安装非常困难。

The other components of the case such as the rotating bezel also require a hand finish, particularly for drilling the screw thread and polishing.

表壳的其它部件，如旋转表圈等，同样须用人手处理，特别是钻螺丝内牙和抛光。

Production costs born by Party B: Party B shall bear the extrusion nozzle mould cost 3000 Yuan，and the cost of plastics screw thread of 4000 Yuan.

乙方负担的制作费用：乙方承担挤出嘴模具费3000元，塑料丝扣磨具费4000元。