CRMA; Waterproofing material; Tangential test; ABAQUS; Numerical value simulation.

胶粉改性沥青；防水材料；正交试验；abaqus；数值模拟。

The simulation of roll forming with multiple passes was studied by FEM software ABAQUS.

利用ABAQUS软件对多道次辊弯成形数值模拟技术进行了研究。

Two kinds of structure models are built based on ABAQUS nonlinear finite element software.

采用ABAQUS非线性有限元分析软件对这两种结构形式进行实体建模。

ABAQUS also provides a model to specify a static and akinetic friction coefficient directly.

ABAQUS还提供直接指定动静摩擦系数的模型。

With the ABAQUS explicit integral model, a simplified simulating model for the power spinning was presented.

利用ABAQUS软件的显式积分计算模块，建立了一种简化的旋压加工模拟计算模型。

The coupled characteristics of the pit's environment induced by dewatering were analyzed by the software ABAQUS.

利用有限元软件ABAQUS对基坑降水环境效应的耦合性状进行分析。

The coupled characteristics of the surface settlement induced by dewatering were analyzed by the software ABAQUS.

利用有限元软件ABAQUS对基坑降水引起周围土体沉降性状进行分析。

The process of creating a infinite element model using ANSYS and calculating using ABAQUS is explained in particular.

并较详细地介绍了利用ANSYS的建模过程和ABAQUS的计算过程。

The effects of two sides widening of new embankment on the old pavement and subgrade are analyzed with ABAQUS software.

采用有限元软件ABAQUS分析了双侧加宽时新路堤作为附加荷载对老路堤和地基的影响。

In the present study, a three-dimensional FE model of shot peening process was developed using commercial software ABAQUS.

运用商用软件ABAQUS建立了铸钢钢丸冲击结构钢靶材的三维有限元模型。

Temperature and residual stress fields of industrial pipe discontinuous and continuous butt welding was simulated by ABAQUS.

应用大型有限元分析软件ABAQUS，对工业管道间断焊与连续焊的温度场和残余应力场进行数值模拟。

FEM software, ABAQUS, is used to model the landing gear for an aircraft, and carry out the numerical simulation for drop test.

利用大型商用有限元软件ABAQUS对某机起落架建模，并进行落震试验数值模拟。

This paper presents a finite element method (FEM) model for the analysis of concrete filled steel tubes (CFT) based on ABAQUS.

本文以abaqus为平台，建立一套分析钢管混凝土的有限元模型。

These tests have also been analyzed by using a variety of design methods and a commercial finite element program ABAQUS (1998).

应用一系列的设计方法和商业化的有限元软件ABAQUS(1998)对试验进行了分析。

This text mainly introduced the application of the common finite element software ABAQUS in lean concrete base asphalt pavement.

主要介绍了有限元通用软件ABAQUS在贫混凝土基层沥青路面中的应用问题。

The elastoplastic analysis is finished with ABAQUS, the upside spatial steel truss and the node analysis is computed with ANSYS.

弹塑性分析方面采用ABAQUS进行计算，对上部的空间钢桁架及其节点进行了ANSYS分析。

Let this criterion be a subroutine of ABAQUS 'main program and kept the two in real time communication in finite element algorithm.

有限元计算时将断裂判据以子程序形式嵌入ABAQUS主程序并保持两者之间的实时通信。

The simulation of aluminum alloy plate tungsten inert gas welding (TIG) process using finite element software-ABAQUS was researched.

利用ABAQUS有限元软件对铝合金平板钨极氩弧焊(TIG)焊接过程进行了数值模拟。

ABAQUS is the advanced general nonlinear finite element analysis software, which has very obvious advantage in solving nonlinear problem.

ABAQUS是先进的大型通用非线性有限元分析软件，求解非线性问题时具有非常明显的优势。

ABAQUS is a robust finite analysis software for engineering simulation. Form linear analysis to many complex non-linear problem can be solved.

ABAQUS是一套功能强大的工程模拟有限元软件，其解决问题的范围从相对简单的线性分析到许多复杂的非线性问题。

The change of temperature field during the soaking of the slabs used for semi-endless rolling was simulated by ABAQUS finite element software.

利用ABAQUS有限元软件对半无头轧制超长铸坯均热过程中的温度场变化进行了数值模拟。

With ABAQUS which has powerful function and abundant elements, the finite element analysis model was built up to analyze the plane failure slope.

借助ABAQUS的强大非线性功能和丰富的单元库，建立了平面破坏型边坡有限元分析模型。

By using ABAQUS software, force convection elements were adopted to simulate the heat transfer between the coil and the forced convective hydrogen.

应用abaqus软件的强制对流单元，研究了在特定的气体流动条件下的钢卷与气体之间的传热。

The front deflection of high precise and heavy-duty rotating center in P60S rolling-gear machine was analyzed by using finite element software ABAQUS.

利用ABAQUS有限元软件分析P60S滚齿机上的高精度重型回转顶尖的挠度。

Finite analyzing method and large finite software ABAQUS were used to analyze and calculate extrusive intensity of casing pipe under non-symmetrical load.

采用有限元分析方法，运用大型有限元软件ABAQUS，分析计算了受非均匀外挤载荷作用下的套管挤压强度。

The effects of latent heat on temperature field were investigated via self-developed code joining with ABAQUS(superscript TM) for laser cladding procedure.

应用自编子程式与通用软件ABAQU（上标TM）联机模拟计算了考虑潜热影响的激光涂敷过程温度场的变化。

The extraction-resistant behaviors of squeezed branch piles are analyzed with large FEM software ABAQUS and compared to the compression-resistant behaviors.

用大型有限元软件ABAQUS分析了挤扩支盘桩的抗拔特性，并与抗压特性进行了比较。

The influence of different laser-spot Spaces on deformation results of SUS304 stainless steel sheet was studied, and simulated by Finited Element Soft-ABAQUS.

实验研究了不同的光斑间距对SUS304不锈钢板激光冲击的变形影响，并用ABAQUS软件进行了有限元仿真分析。

Using ABAQUS to build the finite element model of reinforced concrete hollow slab and rubber bearing, simulate contact effect between them by set contact property.

运用有限元软件ABAQUS建立钢筋混凝土桥面板与橡胶支座的有限元模型，设置接触属性来模拟二者之间的接触作用。