Supporting roll is one of the main parts on belt conveyer.

经营范围为生产、销售托辊、电动滚筒和皮带输送机的配套产品。

Drawing b: QDB belt conveyer may directly load matters to car.

图b： QD B型装载输送机是把输送机送来的物料直接对汽车装载。

The tubular rubber-belt conveyer is seldom used in Chinese power plants.

管式胶带输送机在我国电厂中应用较少。

In addition, the design of ultralong shuttle belt conveyer is also successful.

超长梭式胶带 布料 机 的设计也是成功的。

Photocell control device, hot press printer, printer, feeder , and belt conveyer.

光电控制装置、热压印装置、打印机、振动送料机、产品输出皮带机等。

The belt conveyer is in the conveyor the most commonly used one kind of transfer mechanism.

带式输送机是输送设备中最常用的一种传输机构。

The structure and working principle of a new-generation computerized belt conveyer scale is described.

介绍新一代电脑皮带秤的工作原理和组成结构。

The Belt conveyer consist of standard parts, which are advanced and simple in structure, easy to maintain.

带式输送机构成标准部分，是先进和结构简单，便于维护。

The shortcomings of the existing dust control of belt conveyer and improvement measures have been narrated.

叙述了胶带输送机现有防尘罩的不足及改进措施。

The utility model relates to a device for monitoring and protecting the systematic stoppage state of a belt conveyer.

本实用新型涉及皮带机系统堵料状态的监测和保护装置。

The running of a tubular belt conveyer calls for some requirements in conveyed material states and running conditions.

管状胶带输送机的运行，对输送物料的状态和运行条件有一定的要求。

This paper introduces the principle and structure of the intelligent fuzzy control system of material flow of the belt conveyer.

介绍了带式输送机物流流量的智能模糊控制系统的工作原理和构成。

An control system of underground belt conveyer is developed on the specific condition in mine based on dynamic load forecasting.

文章设计了基于动态负荷预测的矿用井下皮带输送机控制系统。

Through analysing the reasons of familiar broken down of the belt conveyer in the process of using, puts forward solving methods.

通过对带式输送机实际使用过程中输送带常见故障原因分析，提出解决方法。

This paper introduces the strain unit of belt conveyer, focus our discussion on automatic strain unit and how to choose strain unit.

介绍了带式输送机拉紧装置的形式，并着重介绍自动拉紧装置及选用原则。

The paper briefly introduces the characteristics, principles, structure and function of the electric control system of belt conveyer.

介绍皮带输送机电控系统的构成、特征、功能及原理。

It wants to realize the importation, fold of the chocolates the sides, etc. the function. Until it finally be output by belt conveyer.

它要实现巧克力糖的输入、折边、抄底边、等等功能，直到最后由输送带输出。

Based on characteristic and principle of the belt conveyer, PID control and Fuzzy control are applied to the belt conveyer respectively.

根据带式输送机的特点和原理，分别采用PID控制与模糊控制算法对带式输送机进行研究。

The tension apparatus is a basic component of belt conveyer, it is a important part that guarantees the belt conveyer to operate normally.

拉紧装置是带式输送机的基本组成部分，是保证带式输送机正常工作的重要部件。

4 . this machine has accessory automatic stripping apparatus , belt conveyer , storage hopper , elevator , hydraulic station and hackbarrow.

4该机配套有自动脱模装置皮带输送机储料斗升降机液压站运砖车。

The paper explains the application of belt conveyer for indined shaft hoisting, and points out the attention in correct deciding on a scheme.

本文阐述带式输送机在煤矿主斜井提升中的应用，以及正确确定方案的注意事项。

The paper analyzes causes of rubber belt run out in belt conveyer, gives corresponding adjusting measures and several automatic adjust methods.

文章对犁式卸料输送机在运行过程中的卸料器、输送胶带出现的问题进行了全面分析，介绍了具体的对策和解决方法。

It expounded special functions of hydraulic coupling used in the drive of multi-drums and malti-ple heads mounted on long distance belt conveyer.

阐述了液力偶合器在长距离胶带输送机多滚筒驱动和多头驱动中的特殊作用。

Based on the practice experience, the paper introduces group weld technology of heavy belt conveyer driving supporter and the appropriate measures.

结合实践经验，介绍了固定式大功率带式输送机传动机架组点、焊接、加工工艺应注意的事项及相应采取的措施。

This paper introduces the structure, the operation principle, technical parameters and the application scope of the ZX type turning device of belt conveyer.

介绍了ZX型带式输送机转向装置的基本结构、工作原理、技术参数和适用范围。

This system can calculate the dynamics parameters of belt conveyer under different working conditions, and have realized the visualization of those parameters.

该系统可计算不工况下运行的带式输送机系统的动力学参数，并实现了动态参数的可视化。

On the main problem in running of Yanzishan Coal Mine main well belt conveyer decelerator and the problem of mending damage gears, we transform the original decelerator.

针对燕子山矿主井带式输送机减速器运行中存在的主要问题和损坏齿轮补配问题，对原减速器进行了改造。

The design plan of belt conveyer driven by linear motor is described and contrasted to another plans and points out the prospects of belt conveyer driven by linear motor.

叙述了利用直线电机驱动带式输送机的方案，并对各种方案进行了对比。同时指出了直线电机驱动带式输送机的前景。