The new structure of a taper pin connection with external thread is introduced.

介绍了一种外端带有螺纹的圆锥销联接的新型结构。

The traditional analysis and design of steel frame assume beam-column connections are fully rigid or ideal pin connection.

传统的钢框架分析和设计都假定梁与柱的连接是完全刚性的，或是按理想铰接的。

The key in finite element analysis on complete pile frame of rotary pile drill-finite element model of pin connection, is researched in depth.

对旋挖钻机桩架整体有限元分析中的关键件——销轴连接的有限元模型进行了深入研究，并提出了实用而精确的有限元模型。

The key in finite element analysis on complete pile frame of rotary pile drill-finite element model of pin connection, is researched in depth. A feasible and accurate finite element model is offered.

对旋挖钻机桩架整体有限元分析中的关键件——销轴连接的有限元模型进行了深入研究，并提出了实用而精确的有限元模型。

These filters cannot agree on a connection. Verify type compatibility of input pin and output pin.

这些过滤器无法通过连接。请检查输入与输出端口的类型兼容性。

It is possible to establish a connection between the pin of a plug and the hole of a live socket while the other pin is accessible.

这是可以建立一个套接字连接的引脚之间的插头和生活的一个洞，而其他引脚访问。

Guide vane operation structure includes the guide vane arm clip board, guide vane arm, segmental keys, connection board, handle, cut pin, connecting rod pin and gland, etc.

导叶操作机构主要包括：导叶臂压板、导叶臂、分瓣键、连接板、耳柄、剪断销、连杆销及压盖等。

To ensure a secure connection between the arm and the disc nut, split pin is used.

为了确保臂杆和阀瓣螺母之间的安全连接，使用了开口销。

For connection of the oven to the PC there is a9 pin connector on the back of the oven.

微波炉和电脑通过微波炉背后的9针连接口连接。

The track rod length is set so that its connection to the track arm falls on an imaginary line taken from the king pin to a point on the vehicle center line just in front of the rear axle.

转向横拉杆长度的设置要保证转向横拉杆与转向节臂的连接点位于主销到后桥前端汽车中心线上的点所形成的假想连线上。

The track rod length is set so that its connection to the track arm falls on an imaginary line taken from the king pin to a point on the vehicle center line just in front of the rear axle.

转向横拉杆长度的设置要保证转向横拉杆与梯形臂的连接点位于主销到后桥前端汽车中心线上的点所形成的假想连线上。

Connection between post, upper rail shall be mounted by taper pin or welding, the specified method refer to the details followed.

立柱与扶手管、杆间采用销钉固定或焊接固定的方式，具体的连接方式见后面的的详细要求。

The status of the pin of the microcontroller depends upon values of the DDR bit, the port bit, and its external connection.

微处理器的管脚状态依靠DDR位的值、端口位和其外部连接。

The pin assignment for this connector is shown in Figure 2. The connector for DCE equipment is male for the connector housing and female for the connection pins.

引脚分配为这个连接器是数字显示，在二，连接器的DCE设备是男性为连接器的住房和女性为连接引脚。

For high pin-count products, some cases were illustrated using common ground connection and separating the ESD tests to overcome the limitations on SB available leads.

对于一些多管脚芯片产品，举例说明了一种共地连接、分组测试的方法，克服了该封装有管脚数量限制的局限性。

The connection type between the vertical guide plate of the vertical adjusting mechanism and the positioning plate can adopt compression-fitting connection or dowel pin type connection.

纵向调节机构的纵向导板与定位板之间的连接方式可采用压紧连接或柱销式连接。

Take pin threads of NC50 drill collar as an example, Finite Element Method is used to analyze the different stress-relief grooves of pin thread connection.

以NC50型钻铤公螺纹作为研究对象，用有限元方法对加工有不同应力减轻槽的钻铤公螺纹接头进行了分析计算。

Are they related? We don't know, we don't have enough evidence to be able to pin down that kind of connection.

它们之间有关系吗？我们不得而知，至少我们还没有足够的证据把这两件事牵连在一起。

The 8-pole connection System gives you the convenience and security of an Ultra-Lock connection in a higher pin count to handle a broader array of applications.

8位连接系统为您提供了一个更高的引脚数量，让您方便更安全地处理更广泛的应用超锁连接。

Chapter 4 mainly illuminates safety sampling technique, including theory of corer tube stability, qualitative analysis of parameters of corer releasing and a new type connection of plug pin.

第四章介绍了取样器安全性准则，主要包括保真取样器稳定性理论及取样器释放参数的定性分析及新型销轴式连接方式。

The utility model is mainly formed by the connection of a movable lock catch (2) and a fixed lock catch (6) via a pin roll (5). The movable lock catch is provided with a lock tongue plug jack.

它主要由活锁扣片（2）和死锁扣片（6）通过销轴（5）连接构成，在活锁扣片上有一锁舌插孔。

The main causes is analysed for looseness of the threaded connection on pumping unit crank pin and the corresponding preventive measures are proposed.

文章介绍了多种螺纹联接的预紧力控制方法和防松措施，从多方面针对性的阐述了解决螺纹联接质量的方法。

The features and pin description are presented in this paper by SST corporation and the high speed digital signal processor made in TI. The connection and procedure of 28SF040 and DSP are also given.

基于TI公司的高速数字信号处理器芯片，详细描述美国SST公司推出的2 8SF0 40闪存芯片的性能特点、引脚功能，同时给出用其扩展DSP芯片的程序存储器空间的硬件设计电路与软件编程方法。