The Structure designing of bellow seal joint and it′s multiple cavity mold designing are introduced in this paper.

的翻译是：在结构设计的波纹管密封圈联合和它的多个模腔模具设计中引入了这一份文件。

The process allows for several parts to be moulded as one unit and multiple cavity moulds can be applied, reducing tooling costs and production throughput times.

这种工艺过程可以使几个部件，作为一个单元同时铸造，而且也可以使用多腔模型，从而减少了加工成本和生产时间。

Multiple die with hydraulic compensating device adopts the design of multi-dies gathering in a common grease cavity, using high temperature lubricating grease as the pressure compensating medium.

多冲模液压补偿装置采用多个冲模集于同一油脂腔中并用高温润滑油脂作压力补偿介质。

The path length around the cavity is carefully monitored and adjusted so that it is an integral multiple of the peak power laser wavelength.

该路径长度约腔是仔细监测和调整，以便它是一个完整的倍数的峰值功率激光波长。

Results Seven cases (63.6%) have multiple lesions with short burr and small cavity. Six (85.7%) of them have "halo" sign and 3 have bronchial ectasia.

结果7例（ 63 .6% ）为多病灶，可见短毛刺及小空洞，其中6例（ 85 .7% ）出现“晕”征，3例支气管壁增厚及支扩；

The imaging features were bag included mass, which was characterized by a big bag surrounded by a little soft-tissue, or thin walled cavity, or multiple honeycomb or cystoid circular translucency.

其CT特征为囊腔大、周围软组织少的块中囊，或呈薄壁的空腔、多发性蜂窝状、囊腔状环形透光影。

The structure of multiple-aperture radiation element is a closed cavity which cant be processed with normal machining method and have to be disparted to several parts.

多口径辐射单元结构是一个封闭的腔体，采用常规的机械加工方法无法实现，必须将其分解成几个结构件分别加工，再将其连接成腔体。

Methods Sixteen cases of CCBS were performed with bands excision, suturing using multiple Z-shaped skin flap, periosteotomy, and drilling of the cortical bone into medullary cavity.

方法对16例先天性束带症患者采用束带切除、多“Z”皮瓣缝合、切开骨膜、骨皮质钻孔、打通髓腔的方法进行治疗。