But the phenomenon is pressurised thermal shock.

但是现象是高压热冲击。

The results were compared with the results of thermal shock of plate.

本文结果同平钣热冲击的结果作了比较。

Thermal shock to the components will need to be considered with this method.

采用这种方法时需考虑对元器件的热冲击。

Adhesive strength, hardness and the thermal shock resistance of spraying coating were tested.

测试了喷涂层的结合强度、硬度以及抗热震性能。

Fracture toughness against pressurised thermal shock, do you know what a pressurised thermal shock is?

对抗高压热冲击的断裂韧性，你们知道什么是高压热？

The formation mechanism of thermal shock fatigue crack of cemented carbide YG10 was investigated.

研究了YG10硬质合金热冲击疲劳裂纹的形成机制。

Thermal shock problem is always one of the most concerned questions in Solid mechanics theory field.

热冲击问题一直是固体力学理论研究的热点问题之一。

It was indicated that the higher laser energy input is harmful for thermal shock lifetime of LR TBCs.

能量密度较小的激光重熔试样具有高于等离子喷涂试样的热震寿命。

The crack formation of thermal shock fatigue is related to the nucleation, growth and join of microvoid.

热冲击疲劳裂纹的形成与微孔洞的形核、长大和连通有关。

Because of the low expansion of fused quartz itself, the product possesses good thermal shock resistance.

同时由于熔融石英本身的低热膨胀性，使其具有优良的抗热震性。

But the densification of ceramic materials is vitally important to mechanical, thermal shock and fatigue properties.

但是，陶瓷材料的致密化对其力学、抗热震和热疲劳性能有至关重要的影响。

However, exceptional thermal shock curve expressed by electrical resistance only occurred to drop in the initial stage.

个别电阻表征的热震损伤曲线仅在初始阶段损伤有下降现象。

The special film structure of transducer can reduce greatly the instantaneous temperature error from the thermal shock.

传感器的特殊膜片结构可以大大减小瞬变温度误差。

This paper presents a simple analytical method solving the dynamic stress response in a solid sphere under thermal shock.

本文提出一种简便的解析方法求解实心球体在热冲击载荷作用下的动应力响应。

It was shown that the dynamic effect of the temperature and thermal stress of piston must be considered during thermal shock.

计算结果表明：活塞在热冲击期间表现的温度及热应力的动力学效应是必须加以考虑的。

The optimism design of thickness for this cladding material is helpful to improve the performance of thermal shock resistance.

对硬质覆层材料的厚度进行优化设计有助于其抗热震性能的提高。

Adding 7% cordierite, 7% flint clay and 2% quartz sand in matrix enabled the castable to have highest thermal shock resistance.

基质中同时引入7%的堇青石、7%的焦宝石和2%的石英砂时，浇注料的抗热震性最好。

Skin irradiation with high-power pulsed laser light induces a thermal shock which stimulates fibroblasts to produce new collagen.

其是利用高能脉冲激光照射皮肤，产生热震，刺激成纤维细胞产生新的胶原。

They are outstanding for their hardness, density and resistance to thermal shock, wear, chemical attack and self-lubricating property.

它具有硬度高、 密度高、抗热振性、 耐磨性抗化学腐蚀性和自润滑性好等特点。

This tough alloy successfully resists the effects of prolonged high operating temperatures, hard water, acids, corrosion, and thermal shock.

这种特别耐用的合金能够成功地抵抗长时间高温、硬水、酸、腐蚀物和热冲击所产生的破坏作用。

The chamber obey "thermal shock test" (GJB150.5-86) technic standard, the thermal shock chamber can satisfy countryside exigent requirement.

试验箱执行《温度冲击实验》(GJB150.5 - 86)技术标准，可以满足温度冲击试验的需求。

They are widely used in the analysis of dynamic processes of various physiochemical reactions and fine processing with minimal thermal shock.

它已广泛应用于物理化学反应的动力学过程分析和热效应可忽略的超精细加工。

In addition, yawning when it is extremely cold may be maladaptive, as this may send unusually cold air to the brain, which may produce a thermal shock.

另外，在极度寒冷的时候打呵欠也许不大合适，因为这时通常会将冷空气送到大脑，从而使大脑发生热冲击。

The results show that with the adding Of BN content, the density and cross breaking strength is lowed down. And thermal shock resistance improved.

结果表明，随BN含量的增加，复合材料的密度和抗折强度均随之降低，而热震性则随之升高。

WF40 coating is the epoxy glass flake coating with thermal expansion efficient close to that of base metal and high resistance to the thermal shock.

WF 40涂料为环氧型玻璃鳞片涂料，其热膨胀系数与钢质基体接近，因此具有耐热冲击性强等优点。

The material had high emissivity, high bond strength and thermal shock resistance, it was a mew ceramic material of high efficiency and saving energy.

这种材料具有高辐射率、高粘结强度、抗热震性能好等特点，是一种高效节能的陶瓷新材料。

The experimental result coincided with the thermal shock parameter R and R calculated values based on thermal shock fracture and thermal shock damage.

这同热震断裂和热震损伤理论计算的热震参数R和R的结果相一致。

The material had high emissivity, high bond strength and thermal shock resistance. it was a new ceramic material of high efficiency and saving energy.

这种材料具有高辐射率、高粘结强度、抗热震性能好等特点，是一种高效节能的陶瓷新材料。

The dynamic thermal stresses responses analysis model problems of metal-ceramic functionally graded materials (FGMs) under thermal shock load are studied.

研究了梯度材料在承受热冲击载荷作用时的动态热应力响应分析模型问题。