At last, the indexes of mechanics of materials of bone were calculated.

最后计算出骨材料力学指标。

The generalized concepts on superposition method in mechanics of materials are elaborated.

阐述了“叠加法”在材料力学中较广义的概念。

The experimental teaching of Mechanics of Materials plays an important role in the teaching.

材料力学实验课程在材料力学教学中有着非常重要的地位。

Heat Transfer, Fluid dynamics, Engineering Thermodynamics, Mechanics of Materials, General Chemistry.

传热学，流体力学，工程热力学，材料力学，普通化学。

Based on the idea of bar deformation in mechanics of materials, a new deformation method is presented.

运用材料力学中杆件变形的思想，提出了一种新的变形方法。

Traditional mechanics of materials method applied to designing strain-gauge balances is simplified much more.

用传统的材料力学方法设计应变天平时要作较大的简化。

The chemical engineer who specialize in equipment must have thorough and extensive grounding in mechanics of materials.

设备专业的化学工程师必须在物料的机械性能上受过透彻、广泛的训练。

Researchers at the Fraunhofer Institute for Mechanics of materials are looking for suitable transparent materials to make them.

夫琅和费材料力学研究所的研究员正在为此寻找合适的透明材料。

The relation between hoop strain and radius-directional pressure was set up based on the theoretics of mechanics of materials.

根据材料力学理论建立了活塞环环向应变与径向压力之间的关系式。

The method to plot a shear diagram and bending moment diagram in mechanics of materials has been deeply studied in this paper.

本文进一步研究了材料力学中剪力图、弯矩图的画法。

The experiment of measuring principle stresses at one point by the strain gauge method is a basic experiment in mechanics of materials.

测量一点的主应力的电测实验是材料力学实验中的基本实验。

During the experiment on mechanics of materials, a problem of solid circular shaft in torsion testing for large deformation remains unsolved.

目前在材料力学实验中的圆轴扭转大变形问题尚未解决。

The solution of some problems in mechanics of materials by this method is simpler and more convenient than other methods. Its concept is very clear.

用该法求解材料力学中的某些问题，简便易行，概念清晰。

This paper discusses the scientific method for the research of mechanics of materials according to the characteristics of the mechanic of materials Course.

本文从材料力学课程的特点出发，初步探讨研究材料力学的科学方法。

Stress and beforehand close quantum of helix torsion spring of rectangle section is educed by some conclusions of mechanics of materials and compute formula.

该弹簧是保证调整臂正常工作的关键件，本文从材料力学的结论出发，详尽地推导了该弹簧应力及其初始预紧量的设置，并给出它们的计算公式。

Trust force and bending moment result in heat expansion are calculated by adopting beam theory of mechanics of materials and applying force component analysis method.

采用材料力学的梁理论，应用力法分析方法，计算出热膨胀导致的推力和弯矩。

By using the hypothesis of the deformation of the straight bar and beam in mechanics of materials, a new engineering calculating model for a linear inclusion in plane is presented.

使用材料力学的直杆和梁的变形假定，对平面线夹杂问题提出一种新的工程计算模型。

In engineering practice, when a foundation size is small, the foundation pressure can be treated as linear distribution and simply calculated according to formulas of Mechanics of Materials.

在工程实际中，当基础尺寸较小时，基底压力可当作直线分布，按材料力学公式简化计算。

Mechanics of materials is an important and technological basic courses in the university of science and engineering, and it plays a role of a connecting link between the past and the future.

材料力学是工科院校的一门重要的技术基础课，起着承上启下的作用。

By analysed on vibration theory we knew that the load js a static load in mechanics of materials, when the loaded time is 6-8 times as much than the natural vibration period of the unit of structure.

通过振动理论的分析得知，材料力学中静载荷的定量标准是：当加载时间为构件系统的固有振动周期的8倍以上时，这种载荷即可认为是静载荷。

I'm doing Mechanical Engineering which is really interesting but it covers quite a lot of areas like materials science, machine design, physics and of course mechanics.

我学的是机械工程，这很有趣，但它涵盖了很多领域，比如材料科学、机械设计、物理，当然还有机械学。

So a long time before quantum mechanics was developed, people made measurements of the heat capacities of materials.

那么在量子力学建立起来，之前的很长一段时间，人们测量，物质的热容。

Besides, it discusses the other methods in the current teaching materials of mechanics.

并对现行材料力学教材中求主方向角的方法进行了讨论。

Normal stress analysis and shear stress analysis arc performed by means of the approach of materials mechanics.

利用材料力学方法对这种梁进行了应力分析，包括正应力分析和剪应力分析。

From the idea of mechanics of composite materials, the principle of composite materials, including its reinforced-fibre, matrix, interface and its effect and so on, is studied.

本文从复合材料力学的观点出发，对这种复合材料的复合机理，包括其增强相、基体相、界面相及其复合效果等方面进行了研究。

The application of optical methods to mechanics of composite materials is discussed.

本文较为广泛地探讨了光学方法在复合材料力学中的应用。

The macro-and micro-failure theory of materials is a very important research subject of solid mechanics and material science.

材料的宏细观破坏理论是当前固体力学和材料科学研究的一个重要课题。

Therefore the effective inter atomic potentials are widely used and playing an important role in the investigation of the statics, dynamics and statistical mechanics for various materials.

因此，在材料的静力学、动力学以及统计力学的研究中，各种各样等效的原子间相互作用势仍然起着重要的作用。

Interface mechanics is fundamental of the design in interfacial bonded dissimilar materials.

界面力学是异种材料连接界面强韧性设计的理论基础。