A transmission shaft is driven by a flat key.

传动轴用平键传动。

Starter Drive, Transmission Shaft, Cold Forging Parts, Lift Motor.

单向器，传动轴，冷挤压件，摇窗电机。

The pinion meshed with the tension roll drives the transmission shaft;

与张力辊齿轮啮 合的小齿轮驱动传动轴；

Place Taper-lock Bushing and Timing Belt Pulley on the transmission shaft.

将锥面紧固套与同步带轮装在传动轮上。

Place Taper - lock Bushing and Timing Belt Pulley on the transmission shaft.

将锥面紧固套与同步带轮装在传动轮上。

It is applied on motors, motorcars, transmission shaft, gear axle and so on.

适合于电机、汽车、传动轴、齿轮轴等。

Sparated Bearing block for main transmission shaft Easy for maintenance and fix.

主传动轴承座可分拆结构，方便安装及维护。

Sparated Bearing block for main transmission shaft Easy for maintenance and fix.

半精加工的主轴承安装后需要修整和调配，这样曲轴就必须拆下。

During the technical check of the accident, we found that its transmission shaft cracked.

在事故技术检查中发现方向机驱动轴破断。

The design of the main drive system mainly bases on the torque moment of transmission shaft.

传动扭矩是矫直机主传动系统设计的主要依据。

Coupling Series, U-joint Series, C. V. Joint, Construction Machinery Transmission Shaft Series.

汽车十字万向节，三叉万向节联轴器，差速器，传动轴。

The torsional moment of transmission shaft and power of electric motor are reduced by the method.

此方法可降低传动轴上所受的扭矩，减少了电动机的功率。

The seat installation reaches ISO5211, transmission shaft cover can disassemble to fit the shaft …

安装底座符合ISO5211标准，传动轴套可拆卸加工，以适合阀杆的装配要求。

C. shaft coupling on the transmission shaft should be connected with rubber shaft coupling on gear reducer.

传动轴上的联轴器必须与齿轮减速箱上的橡胶联轴器相联接。

The embodiment of the invention also discloses a double shunting reducer with the above transmission shaft.

本发明实施例还公开了一种具有上述传动轴的双分流减速机。

Bodywork is jointed by armor plate, and transmission shaft is adopted common mechanical cutting to process.

车体主要使用钢板焊接，浮动轴采用普通机械切削方法加工。

The transmission shaft gear is directly meshed with the tension roll synchronizing gear to reduce measuring errors;

本发明传动轴齿轮与张力辊同步齿轮直接啮合，减少了测量误 差；

A lubricating oil pump shaft and a CAM transmission shaft are respectively sheathed in series in two inner cavities.

两内腔内分别串套机油泵轴和凸轮传动轴。

Clutch is fixed between engine and transmission shaft, which ACTS as the role of combining or cutting the transfer of motivity.

离合器装在汽车发动机与变速器之间，起接合或切断动力传递的作用。

The calculation results show that in position control mode the effect of transmission shaft weight on strip shape can be ignored;

计算结果表明位置控制模式下主传动轴重量对带钢板形的影响可以忽略；

Agricultural universal joint transmission shaft is a common part for connecting P. T. o of the tractor with power-driven implements.

农用万向节传动轴是联结拖拉机动力输出轴与驱动型农机具重要的通用性部件。

The result indicates that fuzzy optimum design method based on fuzzy synthetic judge of automobil transmission shaft is more practical value.

结果表明，基于模糊综合评判的汽车传动轴模糊优化设计，是一种更具有工程实用价值的综合设计方法。

The transmission shaft drives the fertilizer shifting tray in a hopper to shift the fertilizer into a conveying pipe to fallen into a furrow.

传动轴带动料斗内播肥盘将肥料拨入输料管而落入犁沟。

The testing method using fall size substance specimens is introduced for transmission shaft, oil well pipe, train pothook, cover of sewer well.

介绍了传动轴、油井管、火车挂钩、窨井盖等全尺寸实体试件试验方法与工程实际应用情况。

Ltd. also designs and manufactures various kinds of transmission shaft assembly, shaft coupling assembly as well as hydraulic pump assembly etc.

本公司还竭诚为客户设计，制造各类传动轴总成，联轴器总成，液压泵总成等以满足各界客户的需求。

The third case is due to the deformation of the transmission shaft caused by the imbalance, the general situation in the chassis collision over the car.

第三种情况是因为传动轴变形不平衡引起，一般这种情况出现在底盘碰撞过的车比较多。

For many of the mechanical system of linear reciprocating motion of the supporting role, or transmission shaft support and cooperation, and linear bearing.

用于各种有直线往复运动的机械系统中，起支撑或传动的作用，常与轴支撑、直线轴承配合使用。

Shows high magnetization effect of magnetic iron when magnetic particle coil not conductive, torque transmission shaft transmission from not in driven shaft.

显示高磁化效应的磁性铁粒子当磁性线圈不导电时，转矩不会从传动轴传导于从动轴。

And the main influencing factors are two, 1, the transmission shaft and the balance machine connection way. 2, balancing machine spindle processing accuracy.

而主要影响因素有两项，1、传动轴与平衡机的联接方式。2、平衡机主轴加工精度。