查询
1 词典释义:
ejector
时间: 2025-04-15 18:46:49
英 [ɪˈdʒektə]

n.驱逐者;喷射器;排出器;退弹(壳)器;

comp.弹射的

双语例句
  • Hide the ejector seat levers.

    隐藏弹射座椅的操纵杆。

  • At last, numerical simulation of this ejector was performed.

    最后,对引射器进行了数值模拟。

  • The plain diameter ejector pin may be used in one of two ways.

    普通的顶杆可以有两种使用方法。

  • Part of an engine nacelle and an exhaust ejector are visible at left.

    在左侧可看见部分的发动机短舱和排气顶针。

  • Each ejector pin diameter has a number of different lengths associated with it.

    每一种顶杆直径有许多不同长度。

  • Upper ejector rod was added in the die structure for ease of workpiece separation.

    在模具结构中增加了上项杆(上打料棒),便于工件脱离。

  • The undercut area may stick slide. We may consider to add an ejector pin on the slide.

    产品扣位处可能粘行位。我们需考虑行位上加顶针;

  • The mould plate and ejector grid system is shown in chain-dotted lines in the cross-sectional view.

    模板和顶料格架系统在剖面图上以点划线表示。

  • Ejector seat levers can only be used once, and their consequences are significant and irreversible.

    弹射座椅操纵杆只能用一次,它的使用将引起重要的变化,而且这个。

  • Firstly, the basic fundamental of ejector was introduced and its structure was designed and computed.

    首先,本文介绍了引射器的基本原理,对其基本结构进行了设计计算。

  • The location of the ejector pin elements, and the number used, is dependent on the components size and shape.

    顶杆零件的位置和数目,取决于塑件的尺寸和形状。

  • Just as a jet fighter needs an ejector seat lever, complex desktop applications need configuration facilities.

    就像一架喷气战机需要一个弹射座椅操作杆一样,复杂的桌面程序需要设置设施。

  • The Calculating methods of the ejector were presented using the theoretical base of One-dimensional ideal flow.

    采用理想流体一元管流理论,建立了引射器的理论计算方法。

  • A scheme using lime waste water as absorbent and selecting ejector scrubber for sulfur dioxide removal is suggested.

    提出用石灰废水为吸收剂、选择引射式洗涤器来进行烟气脱硫的方案。

  • This paper presents an analytical method for calculating the flow field and performance of supersonic ejector nozzle.

    本文介绍了超音速引射喷管的流场和性能的理论计算方法。

  • Some of the items on display—including the ejector seat—have never before been allowed out of Russia, says the Council.

    协会说好多展品是第一次离开俄罗斯赴外参展的,包括那个弹射座。

  • Clearance of ejector pin is used to vent little quantity air or the part may intervene with vent plug and ejector pin.

    推杆间隙排气用于排气量不大或者开设排气塞会与推出机构产生干涉的部位。

  • A virtual wind chamber was proposed to accurately predict entrainment rate of the ejector at variable mainstream speed.

    提出了一种虚拟风室模型,以精确计算引射器在各种主流速度下的引射空气量。

  • Introduced a inner ejection pin in Angle ejector structure that prevent product pulling pulling injury and displacement.

    介绍了一种从斜顶内顶杆顶出,防止产品拉伤、位移的基本结构。

  • In this paper, the ejector convergence technology brief, the technology in our company to conduct a feasibility analysis.

    本文对引射汇流技术进行了简要介绍,对该技术在我公司的应用进行了可行性分析。

  • From the experimental results the effects of nozzle axial position and mixer tube length upon ejector characteristic are revealed.

    对实验结果进行分析,指出喷嘴轴向位置,混合管长度对引射器特性的影响。

  • Base on the main problem of vacuum ejector waste system, this paper set out overhaul flow chart and raise check and overhaul method.

    根据污物收集系统的常见故障,列出了检修流程图,提出了检查方法和检修要点。

  • By analysing actual scene to hoist, this paper introduces automatic oil ejector. It can decrease wear and tear, raise using life of steel rope.

    通过对提升机现场实际分析,制作了自动注油器,减小了钢丝绳的磨损,提高了钢丝绳的使用寿命。

  • The calculated results agree well with the test results and it shows that the numerical methods can be used for the study of the supersonic ejector.

    计算结果与实验结果符合较好,这表明该数值方法是研究超声速引射器的一种重要研究手段。

  • The ejection mechanism used pin ejector to pull the plastic parts out with move slanting slide simultaneously leaving circular arc concave position.

    脱模机构采用推杆推出塑件的同时带动斜滑块脱出圆弧形凹位,使脱模机构简单实用。

  • Besides adopting rapping device for ash cleaning, three layers of shock wave ash ejector holes are also reserved and arranged on the horizontal pass.

    本项目的清灰方式除采用振打装置外,还在水平烟道上预留布置了三层激波吹灰器孔。

  • Alternatively the ejector rod may be coupled directly to the hydraulic ram so that forward and rearward movement of the ejection System may be achieved.

    另一种顶棒可以直接和液压缸活塞偶合所以可以实现顶料系统的向前和向后运动。

  • The ejector plate assembly's movement effectively withdraws the central mandrel from the collapsible sleeve, thereby causing it to contract in diameter.

    顶出板组件的运动有力地把实体新棒从环形套管拉出,因此使环形套管在直径上收缩。

  • If you want to fly in the blue sky, just press the blue button, the back of the clothes will be more than a rocket ejector, let you free to fly in the sky.

    如果你想在蓝天上翱翔,就按一下蓝色按扭,衣服后面就会多了一个火箭喷射器,让你在天空自由自在的飞翔。

  • They were incorporated into gothic stonework as early as the 13th-century to keep rain water off cathedral roofs, their mouths serving as the ejector spout.

    早在13世纪,这种哥特式建筑是为了存储教堂屋顶上的淌下的雨水建造的,他们的嘴巴就像是喷泉口。

短语搭配
  • ejector pin

    出坯杆,起模杆;推顶杆,推钉

  • steam ejector

    蒸汽喷射器;蒸汽喷注抽出器

近义词
n. 喷射器;驱逐者;推出器;排出器