Having the slant of a bevel.

具有斜面的倾斜特点。

Sand the wood until it has a nice bevel.

用砂纸打磨这块木头，磨出一个光滑的斜面。

Add Bevel and Emboss and Gradient Overlay.

添加斜面和浮雕和渐变叠加。

It used bevel gears to transmit power to the prop.

它使用的锥齿轮转交权力交给道具。

The bevel is cleaned and the dimensions are correct.

坡口清理完成，尺寸正确。

Bevel and Emboss layer styles add 3d effect on our shape.

倾斜和浮雕花纹层风格添加3d影响我们的形状。

Beveled-entry driveway. Bevel dimensions can be specified.

入口倾斜的车道可指定倾斜的尺寸。

The damaged bevel and pipe ends are identified and repaired.

损坏的管端及坡口已被发现并修复。

It also give a single facet on the bevel so it's easy to repeat.

它还提供了关于斜所以很容易重复一个方面。

After that, select Bevel and Emboss and just follow the image below.

在此之后，选择斜面和浮雕，只是按照以下的形象。

Bevel gears can be mounted at standard, 90, 180 or 270 degree mounting.

锥齿轮可以采用标准位置，90度、180度或270度位置安装。

Again, draw smaller circle shape. Add Bevel and Emboss and Gradient Overlay.

同样，画小圆圈形状。添加斜面和浮雕和渐变叠加。

The bevel milling cutter for cutting groove of oil casing - pipes was designed.

设计了用于油气田管道坡口切割的角度铣刀。

Paint the tooth flank of the big bevel gear with a thin and equal red lead coat.

即在大锥齿轮的齿面上涂一层薄而均匀的红铅油，然后转动齿轮数圈。

You will also learn about the use of the Taper object, Fillet option and Bevel function.

您还将了解锥度对象、圆角选项和斜角功能的使用。

Draw a rounded rectangle on the opposite side. Add Inner Glow and Bevel and Emboss.

上绘制一个圆角矩形对面。添加内发光和斜面和浮雕。

When ordering bevel gear actuators, specify mounting position as second line information.

如果是订购锥齿轮执行器，请在第二行增加安装位置信息。

These drive the central propeller shaft through bevel reduction gears with a 2:1 reduction.

这些驱动器，中央螺旋桨轴通过减少锥齿轮2：1减少。

Top view of bevel headed, hexagonal head set screw. Selection box represents thread diameter.

斜切六角螺钉的俯视图。选择框代表螺纹直径。

Effects, such as shadow, glow, soft edges, and bevel, can also be accessed from the Format TAB.

效果选项包括：阴影、发光、羽化、倾斜，也可以直接使用格式选项卡。

All valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels.

所有阀门都可以配置手轮、链轮和锥齿轮手轮和链轮。

Going into the gearbox, universal joints connect the centre drive shaft to the internal bevel gears.

进入变速箱，万向节连接中心传动轴到内部锥齿轮。

Just one more question, when select the letter I can't use 3d - extrude and bevel because it aint active.

只要再一个问题，当选择的信我不能使用3d -挤压和锥，因为它是不活跃。

Spur gear (SGA) or compound bevel gear (BGA) attachments can be provided in any position shown in Figure 1.

如果采用正齿轮(SGA)或复合伞齿轮(BGA)附件，则可以在图1中显示的各个位置安装手轮。

Then I made a few more details in order to have more realistic close-ups - I added a Bevel modifier to wall's edges.

接着进一步渲染了一些细节，以便更接近真实的效果——在墙壁边缘增加了一个轮廓编辑器。

Operate and maintain finishing machines to grind, drill, sand, bevel, decorate, wash or polish glass or glass products.

操作和维护整理机，磨，钻，沙化，伞，装饰，清洗或抛光玻璃或玻璃制品。

Select the horseshoe shape using the poly tool and bevel it the entire length of your wall looking at the photo if needed.

马蹄形状选择工具和使用聚伞有你的墙整个长度的照片看，如果需要的。