It has important values for the steel making.

对于轧钢设计有参考价值。

It has important values for design of the steel making.

对于卷取机设计应用有着巨大参考价值。

Today we come to see an entirely new steel making process.

今天我们来看一种全新的炼钢工艺。

Electrode automatic control is a key technique in arc furnace steel making.

电极调节是电弧炉炼钢中的关键技术。

It is phosphorus that limited the converter slag's recycling in steel making process.

转炉钢渣中的磷是影响钢渣在钢铁企业内部循环的主要因素之一。

The same, involving a large volume flow is generated in the vacuum degassing in steel making.

同样，涉及大体积流的情况是在炼钢脱气的真空产生中。

The technology has important values for the coil box design and application of hot steel making.

该技术对于热轧热卷箱的控制设计有很高的参考和应用价值。

The bulk of world stainless steel is made through secondary steel making - AOD or VOD processes.

世界上大部分不锈钢是由二次冶金工艺- AOD或VOD生产的。

The major equipments are the ladle and the mould. a ladle is a container to hold the molten steel tapped from the steel making furnace.

主要的铸锭设备有盛钢桶和钢锭模。盛钢桶是用来盛装从炼钢炉放出的钢液的容器。

The major equipments are the ladle and the mould. a ladle is. a container to hold the molten steel tapped from the steel making furnace.

主要的铸锭设备有盛钢桶和钢锭模。盛钢桶是用来盛装从炼钢炉放出的钢液的容器。

The shape and behaviour of non-metallic inclusions in the billets are influenced by degree of deoxidization during steel making process.

生产过程中钢液的脱氧程度决定了钢中非金属夹杂物的形态和行为，直接影响到钢的冶炼品质。

To take away the refining part of the steel making cycle off an electric arc furnace, which is discussed elsewhere, is an excellent start.

把炼钢周期中的精炼阶段从电弧炉中移走（这个问题将在别处加以讨论），是一个良好的开端。

Above 5 years mechanical design experience in steel making, metallurgical or mechanical industries.? If less than 5 years, could be engineer.

高级机械设计工程师需五年以上机械行业、钢铁或冶金行业设计经验。少于5年者，可作为工程师录用。

Combined production practices, research is done on the high-quality lime which produced through rotary kiln for converter steel making at Bengang.

结合生产实践，对本钢回转窑生产供转炉炼钢用高质量石灰进行研究。

Facilities that combine all the stainless steel making facilities from melt shop through hot rolling and cold finishing, to produce mill products.

包含所有的不锈钢生产设施，即炼钢车间、热轧、冷加工等设备的工厂。

This paper introduces the application of active lime in metallurgy such as steel making, refining, hot metal pretreatment, sintering material, etc.

前言： 介绍了活性石灰在炼钢、 铁水预处理、 精炼、 烧结等冶金生产中的应用。

The effects of heat treatment on the properties of multi-element low alloy wear-resistant steel making the liner of rolling mill liner are investigated.

研究了热处理工艺参数对用于制造轧机衬板工作层的多元低合金耐磨铸钢力学性能的影响。

Based on analysis on the reasons for the defects in large sized forgings during steel making, heat treatment and, the preventive measures were formulated.

分析了锻件生产过程中，在锻造、热处理以及炼钢中经常产生缺陷的原因，并提出了预防措施。

The structure and principle of integrating automated system of steel making converter was studied and the testing difficulties appeared in industrial site and corresponding solutions were discussed.

研究设计了转炉炼钢综合自动化系统，介绍了其结构和原理，讨论了工业现场经常出现的调试难点及相应的解决方法。

In this section we have experts on research and seamless as we introduced the steel-making workflow.

本节我们无缝管的科研专家们就为我们介绍了炼钢的工作流程。

This thesis studies the material flow control part for erp implementation in steel-making enterprises.

本文对炼钢企业实施ERP的物流管理部分进行了研究。

Wukong: I can be responsible for building steel-making line!

悟空：我可以负责建炼钢生产线！

The electric arc furnace steel-making productivity has gained rapid progress in the recent years.

近几年来， 电弧炉炼钢生产率有较大的提高。

Steel converter is the main equipment in steel-making, and the drive mechanism, trunnion bearing, is the key component of steel converter.

炼钢转炉是炼钢生产的重点设备，而转炉的传动机构——耳轴轴承又是炼钢转炉的关键部件。

It is studied to apply clean energy in the process of steel-making.

对在钢铁生产过程中使用清洁能源进行了探讨。

It analyzes the technical transform of cover system on the steel-making equipment, puts forward the logical design plan and achieves good desired results.

对炼钢设备上封盖装置的技术改造进行了分析，提出了合理的设计方案，取得了预期的良好效果。

This paper sums up the installation and adjustment of typical instruments in the process of automatic instruments construction of industrial furnaces of steel-making.

对炼钢工业炉子本体自动化仪表施工过程中涉及的几种典型仪表的安装与调试做了较为详细的总结。

The methods to improve the intensity of cold-rolled sheets is to add some useful alloying elements during steel-making and improve the cooling rate annealing treatment.

提高冷轧薄板机械强度的方法主要是在炼钢时添加有益的合金元素及在热处理时提高退火后的冷却速率。