The engine block is the basic frame of the engine.

气缸体是发动机的基本框架。

Engine block is one of the key components of engine.

发动机缸体是发动机的主要部件之一。

Repair all kinds of imports, domestic engine block. Welcome!

修补各种进口，国产发动机缸体。

Even making an aluminium engine block can take only a few minutes.

即使是制造铝发动机外壳也仅仅花费几分钟时间。

The engine block for DF 4C diesel locomotives uses cast welding structure.

东风4C型机车柴油机机体采用铸焊结构。

For, once the engine block and the gearbox are gone, the game of car design changes.

因为一旦引擎和变速箱消失的话，汽车的设计也将随之变化。

The reasons of main bearing and engine block cylinder holes deformings were analyzed.

分析了主轴承孔变形及机体气缸孔变形的原因；

The gasket fit between the engine's chain case and the engine block and covered the timing frame.

该垫圈安装在引擎链盒和发动机组之间，由计时框架覆盖。

The generator is usually mounted on the side of the engine Block. It is driven by the engine fan belt.

发电机通常装在发动机机体的一侧，由发动机风扇皮带来驱动。

The structural reliability of civil diesel engine block has become gradually the hot point of attention.

民用柴油机机体的结构可靠性已逐渐成为人们关注的热点。

The structure, property and machinability of materials of sedan-car engine block was tested and studied.

对轿车发动机缸体的材质和加工性进行了实验研究。

Then, the presented theory is used to analyse the acoustic radiation properties of the diesel engine block.

然后将该理论应用于柴油机机体的声辐射特性分析。

To borrow an image from Jim Butcher (one of my favourite authors), it’s like lifting an engine block out of a car.

借用我最喜欢的作家吉姆.巴切笔下的一个形象说法，就象从车里抬出引擎。

A variable density based topology optimization method was applied to the light-weight design of engine block.

将变密度拓扑优化方法应用于发动机气缸体轻量化设计中。

This allowed for a more efficient engine block configuration and also increased the efficiency of its air intake.

这使得更有效地配置发动机缸体也增加了进气口的效率。

The tappet hole of D6114 diesel engine block is machined difficultly and has high design requirement on accuracy.

D6114柴油机机体挺柱孔加工难道大、加工精度要求高。

In this paper, engine block dynamic characteristic is analyzed with finite element model and verified by test result.

本文利用所建立的机体动态分析有限元模型，分析计算了机体的动态特性，并得到了试验的验证。

The thermal data processing module estimates a second heat transfer from the engine oil to an engine block of the engine.

该热数据处理模块估算自发动机油到发动机的发动机机体的第二热传递。

The transverse vibration of composite engine block was so serious that it was necessary to take measures to improve this defect.

复合材料发动机机体的横向振动是比较严重，需要采取措施改善横向振动特性。

In this paper, the mode character of MWM395 engine block is analyzed with the finite element analysis on the platform of I DEAS.

本文应用有限元法在I - DEAS软件平台上对MWM395柴油机机体进行了模态分析。

This article analyse a type of civil diesel engine block assembling stress measurement, static stress measurement and fatigue test.

本文对某一型号民用柴油机机体安装应力和静态应力测量及疲劳试验进行了分析研究。

In this paper some overall plans of turning device for machining diesel engine block are discussed and their behaviours are compared.

本文提出了几种柴油机机体加工翻转台的新方案，并对这些方案的性能作了比较。

Based on it, the vibration response of the engine block is predicted by FEM, Which provides the basis for modifying engine block design.

在此基础上，对柴油机机体进行了振动响应计算，从而为机体的结构改进提供了依据。

The structural dynamic response of a certain multi? cylinder internal combustion engine block is analyzed applying finite element method.

应用有限元方法对某多缸内燃机机体在活塞推力作用下的结构动力响应进行了分析。

And power plants, steel mills and cement plants, shipping and agriculture the engine block and other sets of anti-corrosion and anti-bite.

以及电站、钢厂和水泥厂、船运和农业引擎套座等的防腐蚀和抗咬合。

Instead of circulating fluid through the engine, the engine block is covered in aluminum fins that conduct the heat away from the cylinder.

发动机不是用液体循环冷却，而是在发动机上装有铝制散热片，使热量从气缸排除机体外。

Production processes, costs, and sub-contractors will be identified to allow short-term mass-production of the entire MCE-5 VCR engine block.

生产工艺，成本，及分包商将确定允许短期大规模生产的整个德育- 5录像机发动机缸体。

Based on the calculated results, the weak point in the engine block is determined. Then the block design is improved to get a reasonable structure.

通过计算和分析，确认了该柴油机机体的薄弱部位，进而对其进行改进设计，寻求合理的结构方案。