查询
1 词典释义:
sls
时间: 2025-03-18 05:25:29
英 [ˌes el ˈes]
美 [ˌes el ˈes]

abbr. 设定位置组号(Set Location Stack的缩写);旁瓣抑制(Side Lobe Suppression的缩写)

双语例句
  • The method to make investment casting cores using SLS technique is studied.

    介绍用SLS技术制造熔模铸造型芯的方法与技术关键。

  • Morphology: Comet-shaped mass with "tail" in collapsed SLS and "head" in posterior SMS.

    形态:彗星状肿块,尾部位于塌陷的舌下间隙,头部位于下颌下间隙的后方。

  • I'd like reporters and his management company let him alone and not to use him for SLS marketing.

    我希望记者们和他的经纪公司不要打扰他,也不要为悲伤恋歌的市场而利用他。

  • Patternless rapid precision casting technology based on SLS prototyping is discussed in this paper.

    论述了基于选择性激光烧结(SLS)成型无模具快速精铸工艺。

  • The technical principle and characteristics of selective laser sintering (SLS) technology are introduced.

    介绍了选择性激光烧结(SLS)技术的工艺原理及特点。

  • The rapid manufacturing for metal parts can be realized by SLS prototyping combining with casting process.

    结合SLS快速成形和铸造工艺可以实现金属零件的快速铸造。

  • From the moment you slip through its gull-winged door, driving an AMG SLS is like being in charge of a batmobile.

    从它的海鸥翼车门钻进去后,开AMG SLS就像在开着蝙蝠侠的蝙蝠车。

  • A new SLS process - rapid prototyping method based on laser diodes energy sources is provided in this paper.

    提出了一种新的基于半导体激光的选择性激光烧结快速成型方法。

  • A process that metallic parts are fabricated through selective laser sintering (SLS) prototype parts is researched.

    主要研究了通过选择性激光烧结高分子原型件制造金属零件的工艺。

  • A series of experiments are carried out with selective laser sintering (SLS) for copper, copper nickel powder materials.

    采用激光选区烧结的方法,对铜、镍-铜混合粉末进行了一系列激光烧结试验。

  • Based on selective laser sintering (SLS) rapid plastic prototype with precision casting technology, metallic parts are made.

    利用选择性激光烧结(SLS)快速成型工艺烧结塑料原型,结合精密铸造技术制出了金属零件。

  • Forked from the now-discontinued SLS project, Slackware 1.0 came on 24 floppy disks and was built on top of Linux kernel version 0.99pl11-alpha.

    从现在已经停止SLS计划项目,Slackware 1.0起始使用了24张软盘,并在Linux内核版本0.99pl11 -α之上。

  • Research progresses of metallic powder materials and nano powder materials fabricated by selective laser sintering (SLS) were reviewed in brief.

    综述了选择性激光烧结金属粉末材料和纳米粉末材料的研究进展。

  • BMW depends on the heavy model fixed with V8 engine for long, such as X6 SUV while Daimler on the roadster for long, such as Mercedes-Benz SLS AMG.

    宝马公司长期依赖宝马X6 SUV等安装V8发动机的笨重车型,而戴姆勒公司长期依赖梅赛德斯·奔驰sls A MG等跑车。

  • In this dissertation, a universal rapid prototyping platform with powder is developed and an experimental study of SLS coated-sand technic is made.

    本论文研发了一套通用粉末快速成形平台并对SLS覆膜砂快速成形工艺进行了实验研究。

  • Compared with other sintering methods, the nano-ceramic materials with the finer grain size and the higher density can be obtained by SLS technology.

    与其他烧结方法相比,激光烧结制备的纳米材料晶粒尺寸更为细小,组织结构更为致密。

  • In this dissertation, it develops a set of platform for general powder instant prototyping and takes experimental studies to SLS coated-sand technics.

    本论文研发了一套通用粉末快速成形平台并对SLS覆膜砂快速成形工艺进行了实验研究。

  • This adapter designwill be tested during EFT-1 for use during the first launch of NASA's nextheavy-lift rocket, the Space Launch System (SLS), in 2017.

    该适配器的设计将在EFT-1第一次发射过程中被测试,它将用于2017年NASA的下一个太空发射系统(SLS)重型火箭。

  • The robust admissibility analysis of a class of uncertain discrete-time switched linear singular(SLS)systems for arbitrary switching laws is addressed.

    研究了一类不确定离散切换线性奇异(SLS)系统任意切换律下的鲁棒容许性问题。

  • This paper analysed the quality and efficiency of alterable laser thread length scanning in SLS RP processing as compared with the spot scanning processing.

    本文分析变长线扫描选择性激光烧结快速成型工艺对点扫描工艺的质量和效率优势。

  • Compared with the other RP process, SLS has attracted extensive attention due to its fast building speed, wide range of materials, simple post-treatment et al.

    相对于其他快速原型技术而言,SLS由于制造速度快、用材广泛和后处理工艺相对简单而备受关注,并且应用领域日益拓宽。

  • The precision controls during investing casting process based on SLS are researched and analyzed, and some means to solve the precision problems are put forward.

    对基于SLS技术的精密铸造过程中的精度控制进行了研究分析,并提出了解决办法。

  • Based on the analysis of the requirement for IP QoS management and current monitoring systems, an SLS monitoring system in multi-service IP network is presented.

    在对IP网络服务质量管理需求及现有监测系统进行客观分析的基础上,提出了一种多业务IP网络中的SLS监测系统。

  • Laser is used to sinter the Selective laser sintering (SLS) parts. The scanning system needs to do plenty of scan, so scan method is very important to SLS process.

    选择性激光烧结(SLS)技术使用激光束进行截面区域烧结,扫描系统需要作大量的扫描,所以扫描路径的选择就显得尤为重要。

  • The whole procedure consists of three phases: SLA-offer construction relying on SLA template and SLS template, policy-based SLA negotiation and SLA admission control.

    这三个阶段分别是基于SLA模板和SLS模板的SLA草稿构造阶段、基于策略的SLA协商阶段和SLA接纳控制阶段。

  • When your well-meaning mom sends you an email telling you that SLS causes cancer or Propylene Glycol causes brain damage, it can make even the most caviler chemist nervous.

    当你好心的妈妈给你发送电子邮件,告诉你SLS导致癌症,或者丙二醇导致大脑损伤,即使最吹毛求疵的化学家也会紧张。

  • This new kind of scanning mode and its arithmetic have successfully been applied to HRPS series SLS systems developed by Huazhong University of Science and Technology.

    这种新的分区变向扫描方式及其算法已经成功地应用到华中科技大学开发的HRPS系列SLS系统中。

  • This paper introduces the fundamental principle of wood fibre SLS sewing, the formula of power density, and how to determine the parameter of wood fibre SLS technology.

    介绍了木纤维sls加工的基本工作原理,提出了功率密度的计算公式,对木纤维s LS技术的参数确定进行了初步探讨。

  • The investigation shows that the dual-closed-loop control for SLS rapid prototyping can obtain fine control stability, and can improve the accuracy of prototyping parts.

    研究表明,SLS快速成形的双闭环控制能够获得较好的控制稳定性并能进一步提高原型件的成形精度。