These provide theory basis for inner roll-gap gauge-control system of HCW strip mill.

为内辊缝控制的HCW轧机厚控系统建模提供了理论依据。

Abstract: a strip mill stretch characteristic in AGC system was studied in this paper.

文摘：对AGC系统中的轧机弹性特性问题进行了研究。

The trends of development of fully-continuous narrow hot strip mill is also pointed out.

同时还叙述了全连续热轧窄带钢轧机的发展趋向。

Investigates the width prediction and setup of strip in rolling passes in a hot strip mill.

研究带钢热连轧生产线中成品带钢的宽度预报与设定。

The new Hot Strip mill in Jiangsu province will have an annual capacity of 3.5 million tons.

这个位于江苏省的新热轧钢厂年产量将达到三百五十万吨。

The results of calculation is reliable and can be used as reference in hot strip mill design.

计算结果可靠，可供设计人员在设计热带轧机时参考。

In this paper, the coiling temperature control of a typical steel strip mill is investigated.

详细研究了一个实际的热轧带钢卷取温度控制系统。

It has been proved that high Cr cast iron rolls are fit for finishing mill of 1549 hot strip mill of Tisco.

介绍了高铬轧辊化学成分和生产工艺，实际使用证明高铬轧辊适合太钢1549热连轧精轧机组。

In this paper, we introduce methods of shape control and application of shape control in cold and hot strip mill.

本文介绍国外有关板形控制的方法及在冷、热板轧机上的应用。

The main process characteristics of cold rolled strip mill train imported for supporting construction are introduced.

引进配套建设的冷轧板带机组的主要工艺技术特点。

The total number of mills, productivity and characteristics of Chinese hot wide strip mill construction were introduced.

重点介绍了我国热轧宽带钢轧机建设的数量、设计产量、建设模式特点等综合情况。

Some methods and ideas for design of crank and connecting rod type crop shear in hot strip mill are supplied in this paper.

通过讨论，为热连轧曲柄连杆式飞剪设计研究提供一些思路和方法。

Problems existing in 2050 mm hot strip mill descaling station of Bao Steel Group are discussed and also the possible solutions.

介绍了宝钢2050热轧除鳞装置存在的问题及解决方法。

Strip mill steel price movements in the EU flat products market continue to be negative as the summer holiday period approaches.

带钢轧机钢平板产品在欧盟市场上的价格走势继续负暑假期间方法 。

The slab tracking system for hot strip mill is an indispensable part in the computer controlling system during continuous rolling.

热连轧机板坯跟踪系统是连轧过程中计算机控制系统不可缺少的部分。

This paper briefly introduces the major technical performances, basic design features and formation of the four-high cold strip mill.

本文简要介绍了四辊精密冷轧机的主要技术性能、设备的组成和特点。

The study on strip shape computational theory of strip mill is a subject which has important theoretical value and practical significance.

板带轧机板形计算理论的研究是一个具有重要理论价值和实际意义的课题。

Roughing setting up mathematic model is adopted in the width control of 1780 mm hot strip mill of Anshan Iron and Steel Group Corporation.

在鞍钢热轧带钢厂1780生产线的宽度控制中，主要采用了粗轧设定数学模型。

A neural network multivariable simple adaptive control (NNMSAC) is proposed, disposing of decoupling control with looper system in hot strip mill.

针对现代带钢热连轧中活套系统的解耦控制问题，提出了基于神经网络简单自适应多变量解耦控制方法(NNMSAC)。

The 1450 Hot Strip Mill of Panzhihua New Steel & Vanadium Limited Company has built in 1993, it is the important plates processing mill of PanGang.

攀枝花新钢钒股份有限公司热轧板厂1450热连轧机组于1993年投产，是攀钢重要的板材加工厂。

The traditional rolling force model of 4-stand tandem cold strip mill at Anshan Iron and Steel Corporation was analyzed, and some defects were found out.

分析了鞍钢冷轧厂4机架冷连轧机轧制力模型，指出了其存在的主要缺陷，并提出了改进方案。

This paper discusses using the neural network to predict the rolling force which is the key-point of the set-up model for the finisher of hot strip mill.

用神经元网络的方法代替传统轧制力模型的计算。解决与精轧机组设定模型有关的轧制力预报问题。

Down coiler is one of the key equipment for hot strip mill, the deviation angle of tension roll is of great importance to biting into coiler successfully.

地下卷取机是热带钢连轧机的关键设备，张力辊的偏移角对于保证带钢顺利咬入具有重要的作用。

Process automation system for Laiwu Steel 1500 mm hot strip mill is described, include system figuration, network, functions of middle ware and application.

介绍了莱钢1500热轧带钢过程自动化系统，包括系统配置、网络结构、中间件和应用软件的主要功能模块。

The work roll surface can be ground on-line by a non-driven cup type of on-line Roll Grinder(ORG) installed in a strip mill to maintain the appropriate roll shape.

它通过设置在带材轧机上的无驱动式杯形磨辊装置，对轧制中工作辊表面进行在线磨别，以保证轧辊保持良好的轨型。

Hydraulic Automatic Gauge Control (HAGC) system is an important large-scale core system in strip mill. It is a key to determine the steel band quality and the yield.

液压厚度自动控制系统(HAGC)是现代大型板带轧机的核心系统，其性能好坏或工作是否正常是决定钢带质量和产量的关键。

Hydraulic Automatic Gauge Control (HAGC) system is an important large-scale core system in strip mill. It is a key to determine the steel band quality and the yield.

液压厚度控制系统(agc)是现代大型板带轧机的核心系统，其性能好坏或工作是否正常是决定钢带质量和产量的关键。

The system of roll mill press down is controlled to compensate the thickness variation of the hot strip mill so as to improve the hot-rolled strip thickness accuracy.

从各种随机噪声的轧制力信号这一复杂高频干扰周期波中分离出偏心信号，控制轧机在压下系统实现对偏心的补偿，以提高热轧带钢的厚度精度。

The severe corrosion of stainless steel fastening bolts on Electrolytic Galvanizing Line(EGL)in cold strip mill plant under current working conditions has been studied.

采用浸泡、电化学、模拟试验以及拉伸试验对冷轧厂电镀锌机组不锈钢紧固螺栓在现行工艺条件下遭受严重腐蚀进行了研究。

For the strip mill roll which has complex structure, stress and crack, based on the stress intensity factor to fracture criterion is an effective way to judge fracture.

对于结构、受力及裂纹形态比较复杂的板带轧机轧辊，采用基于应力强度因子的判据是判断断裂的有效方法。