Sample and Hold, Voltage Reference Circuit design.

采样保持电路、电压源电路设计。

Voltage reference is one of the most important IC cells.

基准电压源是集成电路系统中一个非常重要的构成单元。

An integrated voltage reference eases design considerations.

集成基准电压源可简化设计。

Voltage reference is one of the most important cells in analog circuit.

基准电压源是模拟电路中的一个重要单元。

Adjustable Precision Micropower Shunt Voltage Reference, 0.5% accuracy.

可调节精密微功耗并联电压参考，0.5%精确度。

Adjustable Precision Micropower Shunt Voltage Reference, 0.2% accuracy.

可调节精密微功耗并联电压参考，0.2%精确度。

Adjustable Precision Micropower Shunt Voltage Reference, 1.0% accuracy.

可调节精密微功耗并联电压参考，1.0%精确度。

Generally, this pin is grounded, but it can be tied to any voltage reference.

一般来说，这个引脚接地，但它可连接到任何电压参考。

In this paper, a large number of digital voltage reference design based on the table.

本文在参考了大量数字电压表设计的基础上。

The start-up circuit was design for the bandgap voltage reference circuit working normally.

另外设计了启动电路以确保基准电路能正常工作。

The circuit also USES high accuracy, low drift voltage reference to bias the platinum resistor.

该电路采用高精度低温漂的基准源为铂电阻形成静态工作电流。

A new low-voltage low-power CMOS voltage reference operating in subthreshold region is presented.

提出了一种新型的低电压、低功耗、工作在亚阈值区的基准电压源。

The voltage reference generator was the expansion of the bandgap circuit for saving the resources.

基准电压产生电路为带隙电路的扩展，节省了资源并得到了高稳定度的基准电压。

A bandgap voltage reference circuit with good stability and high accuracy is designed in this pa - per.

设计了一种具有良好稳定性和高精度的带隙基准电压源电路。

A low voltage current mode bandgap voltage reference circuit with a novel start-up circuit is designed.

介绍了一种低压电流模带隙电压基准电路，并提出了一种新颖的启动电路结构。

The power supply voltage may be controlled by replacing D1, D2, R1 and R2 with a variable voltage reference.

将D 1、D 2、R1和R2换成一个可变参考电压源，本电路就变成了一个可控电源。

This paper proposes a novel high precision CMOS bandgap voltage reference which with a soft-start up circuit.

提出了一种新颖的带有软启动的高精密CMOS带隙基准电压源。

Voltage reference apparatus, voltameter, battery voltage detection apparatus and wireless communication device.

电压参考装置，伏特表，电池电压检测装置和无线通信设备。

To design voltage reference and comparator with high performance is a long-term pursuit of analogy IC designers.

设计高性能的基准电压源和比较器是模拟电路工程师一直努力的目标。

Voltage Reference in the design, how to achieve high-precision, low temperature coefficient is a major difficulty.

在基准电压源的设计中，如何实现高精度、低温度系数是一大难点。

A simple structured novel error amplifier with initial voltage reference for series voltage regulator is designed.

针对串联型稳压器，设计了一种应用于串联型稳压器具有自建基准的新型误差放大电路。

This paper analyzes some kinds of methods for voltage reference self-ca libration system and explains them one by one.

对几种电压标准自校系统方法进行了分析探讨，并对它们逐个作了研究说明。

The novel voltage reference source was applied to a Li-ion battery protection IC to provide various detection voltages.

这种新型电压基准电路适用于锂电池保护芯片，提供检测基准电压。

This application describes comparing two standard cells and comparing a standard cell with a precision voltage reference.

下面的应用实例说明比较两个标准电池以及将标准电池和精密电压参考标准进行比较的情况。

A low power CMOS bandgap voltage reference source with a start-up circuit is presented based on the bandgap voltage theory.

运用带隙基准的原理，提出了一种带启动电路的低功耗带隙基准电压源电路。

Current Summing is the basic method to realize low-voltage reference which is different from that of conventional voltage mode.

不同于常规电压求和带隙基准，电流求和是实现低压基准的主要方法。

A depleted NMOS transistor, which was used as current source, and a negative feedback loop constitute a stable voltage reference.

该电路采用耗尽型NMOS管作电流源器件，结合负反馈，实现了稳定的电压基准。

This is accomplished by providing internal voltage reference for each of the quanta into which the analog voltage range is divided.

该转换器的实现原理是，为每一份量值为输入模拟电压除以的电压提供一个内部参考电压。

These features make the EL5221 ideal for use as voltage reference buffers in Thin Film Transistor Liquid Crystal Displays (TFT-LCD).

上述特点使得作为在薄膜晶体管液晶显示器(TFT - LCD)的参考电压缓冲器的使用EL5221的理想选择。

It is obvious that piecewise compensation current could significantly improve temperature characteristics of the voltage reference source.

分段补偿电流对电压基准源的温度特性提升效果明显。